by Gary Mays | Jan 18, 2014 | City of Gold Coast, Consumer Issues, DIY Plumbing, Gold Coast Plumbing, Insurance, Leaking Pipes, Plumbers, Plumbers Gold Coast, Plumbing Emergencies, Plumbing Maintenance, Water, Water Leaks
Badly installed or faulty plumbing installation will flood your home and is a risk you need to minimise. At Whywait Plumbing we have lost count of the amount of flooded homes we have attended. A flooding house caused by faulty plumbing leaves home owners angry, frustrated and often soaking wet.
Whywait staff frequently have to deal with distraught homeowners who are heartbroken by the loss of family heirlooms such as photos and documents. The problem with most plumbing is that it is hidden in the walls or the roof or the floor or is underground. While some plumbing problems are preventable it is impossible to deal with things you cannot see like pipes in walls or in the roof space.
There are steps every homeowner should take inside their home that ultimately can save you a lot of time, money and aggravation. At Whywait Plumbing we recommend you take the following steps to prevent your home being flooded from inside:
1. Know where to turn off your water – always know where the main water supply valve is to your home and practice turning it off to ensure you know how to do it. At regular intervals check that the valve is working. When going on holiday turn off the water supply to your home to ensure you do not return home to a flooded house.
2. Check washing machine & dishwasher hoses – the hoses to these essential household appliances are invariably manufactured from plastic or rubber. These machines are constantly left turned on to the water supply meaning the hoses become part of the plumbing system. In case of an emergency it pays to know where the valves are to isolate the machines plus check the valve is working at regular intervals. At regular intervals check the hoses for bubbles or soft spots or if there is moisture on the hose as these are signs of a potential problem looming.
3. Check hot water tanks – if you hot water tank is inside your home usually in a cupboard or occasionally in the ceiling it pays to check it at regular intervals. A hot water tank will generally last 7 – 15 years depending on location and water quality. Once the tank is over 10 years of age it is living on borrowed time. Always ensure you know where the isolation valve is for the tank and check it at regular intervals to ensure it is working.
4. Check toilets – your toilet cistern is connected permanently to the cold water supply and will either be connected to the cistern tap under the cistern by copper pipe or a stainless steel flexible connector. Leaks are common at the connections so it is wise to check the cistern tap is working and to check the copper pipe or flexible connector for kinks or signs of moisture as these are signs of a potential problem looming.
5. Check sinks and basins – your kitchen sink and your vanity basins are frequently connected to the hot and cold water supply with stainless steel flexible connectors. These connectors are one of the most frequent causes of flooded homes. Frequently there are no isolation valves under the sink or basin so you need to check these connectors at regular intervals for kinks or signs of moisture as these are signs of a potential problem looming.
You cannot prevent everything and unfortunately there are no warnings to tell you something is about to burst.
The most important thing though is to ensure every person living in your house knows where to isolate the main water supply and how to turn it off. If you are not sure of how to isolate your water supply call Whywait Plumbing now.
By Gary Mays
by Gary Mays | Dec 31, 2013 | City of Gold Coast, Cold Water, Consumer Issues, Gold Coast Plumbing, Insurance, Leaking Pipes, Plumbers, Plumbers Gold Coast, Plumbing Emergencies, Plumbing Legislation, Plumbing Maintenance, Water, Water Hammer, Water Leaks
Do you know the risks of living with high water pressure because I frequently listen to clients of Whywait Plumbing recollecting the days gone by when high water pressure was the norm. For many high water pressure had been a bonus, especially when water was virtually provided for free. High water pressure enabled many to stand in one spot and water the whole garden or to literally pressure clean the car or driveway.
Both Gold Coast and Logan council areas in the past had high water pressure delivery. Frequently in excess of 800kPa and often as high as 1100kPa. In reality high water pressures caused many problems with damage to pipes, appliances, taps, valves and fittings from water hammer which also reduced their operational life plus caused excessive noise in the water reticulation system.
Legally under Australian Standards, AS/NZS 3500.1:2003, Plumbing and Drainage – Water Services, the relevant clause is 3.3.4 which states, “Maximum pressure within buildings – Provision shall be made to ensure that the maximum operating pressure at any outlet, other than a fire service outlet, within a building does not exceed 500 kPa.” This was further reinforced with amendments in 2010 to clause 3.2.1 which states, “The maximum flow rate from a shower, basin and kitchen sink or laundry trough outlet shall not exceed 9 L/min.”
These very clear definitions within Australian Standards create a dangerous situation that many home and building owners are unaware of. This is because they have the incoming mains water pressure set above the maximum legislated operating pressure of 500kPa level for most connected plumbing fixtures. These plumbing fixtures include dishwashers, washing machines, ice makers, boiling water units, mixer taps, refrigerators with water dispensers and hot water systems.
Having excessive water pressure can cause you more problems than you may be aware of. Aside from damage to pipes, appliances, taps, valves and fittings from water hammer which also reduced their operational life plus caused excessive noise in the water reticulation system, you may also be voiding your property insurance and manufacturer’s warranty on any number of these expensive household appliances.
Most insurance policies and appliance warranties are void if your water pressure is above the recommended operational levels. This will always come back to the requirements of Australian Standards which is of course 500kPa.
Most hot water system warranties are void above 500kPa once again with the reference point being the requirements of Australian Standards. Many people are fooled into thinking they have a compliant system as they have pressure limiting valves installed. In reality the majority of these valves over 3 years old are faulty and in need of replacement.
As council water retailers will not guarantee supply pressures the onus is back on home and building owners to ensure they are compliant with Australian Standards. Most homes and buildings constructed since 2003 have pressure reduction valves installed after the water meter but these frequently require recalibration. Homes and buildings constructed before 2003 seldom have a pressure reduction valve installed which means they are susceptible to the fluctuations in water supply pressure.
The risks of high water pressure can be devastating on multiple fronts so if you are unsure of what your water pressure is and whether your system is compliant in regard to your insurance policies then contact Whywait Plumbing Services now to carry out a comprehensive analysis of your incoming water pressure to ensure you are aware of the risks of living with high water pressure..
By Gary Mays
by Gary Mays | Oct 12, 2013 | Consumer Issues, Emergency Plumber, Gold Coast Plumbing, Insurance, Leaking Pipes, LPG / NG Gas Leaks
The plumbers at Whywait Plumbing are constantly bewildered by some people think if they ignore the smell of gas that it will go away. Gas leaks are never something you should ignore, even if you perceive it to be that you only have a small gas leak. A suspected gas leak can be dangerous and you should deal with it immediately.
If you smell that distinctive gas smell inside your home we recommend the following:
- Evacuate everyone from the house and open all of your doors and windows
- leave the house and turn off gas at the meter (or LP Gas cylinder if that’s what you’re using).
- If you can and it’s safe to do, switch the power off at the electricity meter box too, so electrical appliances can’t generate a spark.
- Then move to a safe distance and call your plumber or local gas authority (see below).
If you smell that distinctive gas smell outside your home then we recommend the following:
- Immediately turn off or remove all sources of ignition such as cigarettes, mobile phones, and any outdoor electrical equipment in the immediate are
- Call the 000 emergency number and inform you have a gas leak and where you suspect the leak is plus any other relevant information that you have observed
- Turn off the gas at your meter
Your gas meter is usually located at the side or front of your home and to turn off do the following:
- Turn the valve at the gas meter to the OFF position
- If the OFF position is not obvious or has worn off over time then generally the valve is off when the handle is at right angles or to the gas inlet pipe.
Modern gas appliances are almost fool proof but like all appliance they must be maintained. Signs to look for and observe that may indicate that your gas appliances may not be operating correctly include:
- fluctuating flames on your cook top
- you are running out of hot water
- you are running out of gas
- faint smell of gas
- sudden increase in gas bill
- hissing noises from pipe joints
- flames are yellow or red
If you observe any of these appearances or problems then turn off the appliance and contact Whywait Plumbing immediately for a gas-fitter to be sent to your home. Because if nothing else you and your family may be at risk of carbon monoxide poisoning.
Finally never ever attempt to fix a gas leak yourself. It must always be undertaken by a licensed gas-fitter. Repairing a gas leak must always be undertaken by a licensed gas fitter with a gas certificate of compliance issued where pipes, fittings or appliances are modified or replaced. Very simply all these requirements are the law, they are not voluntary options.
When it comes to installing, repairing and maintaining your gas pipes & appliances you can depend on the professionalism, expertise and experience you receive from the experienced gas fitting experts at Whywait Plumbing.
by Gary Mays | Sep 25, 2013 | City of Gold Coast, Cold Water, Consumer Issues, DIY Plumbing, Emergency Plumber, Gold Coast Plumbing, Gold Coast Water, Leaking Pipes, Plumbers, Plumbers Gold Coast, Plumbing Emergencies, Plumbing Maintenance, Toilets, Water, Water Leaks, Water Meters
How to check if you have a water pipe leak
With a water pipe leak, it’s commonly said that prevention is the key. Positive preventive maintenance saves you thousands of dollars in hassles and water damage.
That’s why you want to follow the simple step by step check for a water pipe leak. This will prevent the hassles before they hit you where it hurts most – in your pocket!
Step by Step Instructions
Below we run through:
- Check your taps
- Check your toilets
- Turn the taps off
- Check your water meter
- Wait 15 minutes
- Compare water meter readings
- Turn the taps back on
- When to call a plumber
- When your good to go
At Whywait Plumbing, we have always preached that preventative maintenance policies and procedures will prevent many of the significant cost blowouts in plumbing maintenance.
As always, prevention on checking for a water leak is the best solution. An underground concealed water pipe leak is often impossible to see or hear. More so if your home is on sandy soil or has lots of garden vegetation.
The simplest way to check if you have a concealed water pipe leak is to follow the how-to steps below:
Step 1 – Check your taps
Check all taps both inside the house and outside the house are not dripping.
Step 2 – Check your toilets
Check the toilet cisterns are not overflowing or running into the toilet bowl by tipping a few drops of food dye into the cistern and if there is no colouring of the water in the toilet bowl you know there is no leak.
Step 3 – Turn the taps off
Turn off all the taps that you normally leave turned on, such as the washing machine, dishwasher and the toilet cisterns.
Step 4 – Check your water meter
At the council water meter check the meter is not turning and write down the figures on the meter dial.
Step 5 – Wait 15 minutes
After 15 minutes recheck the water meter and write down the figures on the meter dial again.
Step 6 – Compare water meter readings
Compare the figures you have written down, and if the numbers have not changed at all, then you have no water pipe leak. If the numbers have changed very slightly repeat the test but do it for at least 1 hour.
Step 7 – Turn the taps back on
If you are satisfied there are no leaks remember to turn back on the taps you turned off at the washing machine, dishwasher and toilet cisterns.
Step 8 – When to call a plumber
If the meter dial reading on the water meter has changed after 1 hour then in all likelihood you have an underground concealed water pipe leak, and you need to give Whywait a call to organise leak detection.
Step 9 – When your good to go
If the meter dial reading has not changed, that means your underground water reticulation piping is in good condition.
Prevention is the key
No matter what your results in the above step by step preventative maintenance suggestions, we recommend you repeat it monthly. We also recommend you record your water meter readings every month as any change in water use patterns will quickly indicate a possible leak.
As a rule of thumb, YOU ARE RESPONSIBLE for any water leak after the council water meter that is on your property. Therefore we recommend that you at least check your water meter reading every month and seriously consider the installation of an AquaTrip water pipe leak detection and control system.
by Gary Mays | Sep 5, 2013 | bathroom mould, Bathrooms, Consumer Issues, Drain Odours, Gold Coast Plumbing, Health Issues, Leaking Pipes, Plumbers, Plumbers Gold Coast, Sustainable Plumbing
Do you have mould around the tiles or on the walls in your bathroom or kitchen? If you do then you are not alone as it is a common problem particularly in bathrooms but also in kitchens in South East Queensland due to our sub-tropical climate. Like most problems prevention is vital and often very simple.
Because your bathroom and especially the shower area are the wettest areas in your home it is not uncommon to see mould growing in the grouting and silicon sealants. Bathroom Mould loves the perfect atmosphere to create the ideal conditions for mould growth in the cracks and gaps in the tiling. Consequently mould grows in behind and through the grout joints on the tiles. As can be seen on the photo on the right mould loves getting in behind the silicon seal on the internal corners whether it be the wall or the floor.
The most common area to find mould is in your shower where it is nourished by your body oils, shampoo and soap residue that are left behind every time the shower is used.
Poor air circulation actively assists mould growth as the warmth and moisture created in the enclosed area of a shower offer further ideal conditions for mould growth in the dark areas of the shower around the internal corners and the shower floor drain. Poor air circulation is easily resolved by ensuring you install a good quality bathroom extraction fan above the shower that turns on automatically to remove all of the steam and water particles while you are using the shower.
If you are suffering from mould growth in your bathroom and or kitchen then Whywait Plumbing recommend that you act now to remove it before permanent stains are created. To not only prevent but also treat mould you need to use what nature uses and that is enzymes rather than corrosive chemicals. Enzymes are a natural part of our world and play an important role in everyday life. They are found in every living organism and life is not possible without enzymes. Enzymes are catalysts – not living organisms.
The success Whywait Plumbing have enjoyed with utilising Enzyme Wizard products is incredible with every problem we have utilised it on exceeding not only our expectations but those of our clients. Enzyme Wizard products are a guaranteed supply of plant based enzymes and enzyme products that by their very nature eliminate odours and organic matter, from blood stains, to cleaning carpets and counter tops, removing wallpaper, and even used as a high quality cleaner/degreaser.
For preventing and treating bathroom mould in the bathroom or the kitchen you need to utilise Kitchen & Bathroom Mould & Mildew spray which is a spray and wipe product which is suitable for all surfaces in a bathroom or kitchen whether they are formica or stone bench tops, tiles, glass, timber or stainless steel as it will not only attack existing mould but prevent mould developing.
If you have surface mould in areas such as tiles grout simply spray the effected area with Mould & Mildew spray whilst cleaning the area with a stiff brush. Once you have finished brushing the area leave it 5 minutes then rinse it with clean water. If you have heavy infiltration of mould it maybe necessary to apply a couple of extra times to completely remove the mould.
Frequently you will find mould behind the silicon sealant on the internal corners in tile areas which will require more thorough work. You will need to use a utility knife such as a Stanley knife to scrape off all of the silicon plus ensure you use use a blade to scrape the remnants of silicon clear off the tiles. Once all of the silicon has been removed spray the mould with Mould & Mildew spray as above until it has all disappeared. Once the mould has gone rinse the area clean and dry it thoroughly with a hot air dryer to ensure there is no moisture trapped in the open joint. Finally you will need yo apply a good quality mould resistant silicon to the joint which is specifically designed for high moisture areas.
Once you have removed the kitchen or bathroom mould you need to ensure that you remove the chemical cleaners and bleaches from your cleaning regime and use Enzyme Wizard products in your bathroom and kitchen to prevent mould reoccurring and ensure you have a positive prevention program in place in your home that contain no harmful phosphates or caustic chemicals.
If you observe mould reappearing after a few days of removing then you may have problems with leaking pipes or fittings that require a thorough investigation by Whywait Plumbing to ensure you are not damaging internal frames and wall linings. If you have leaking pipes or fittings behind the wall then mould is only a sympton of a bigger problem and ignoring will not make it disappear. If in any doubt contact Whywait Plumbing for advice on how to deal with mould in your bathroom and or kitchen.
by Gary Mays | Jul 4, 2013 | Health Issues, Insurance, Leaking Pipes, Plumbing Emergencies
Imagine you’re at home in the kitchen, cooking dinner and water suddenly starts to pour through the light fitting in the ceiling above your head.
Do you know how to shut off the main water supply into your home?
If you answered yes that’s great. But do your children know?
And yes just in case you were wondering a light fitting is the most common place for water to leak from in the ceiling. The first thing to do is turn off the water and not the electricity supply.
Considering the amount of panicking phone calls we receive every week at Whywait Plumbing from people who have water pouring out of the ceiling or out of a burst tap or from under their sink or from their hot water service I can assure you there is an awful lot of people who don’t know how to turn off their main water supply.
In any Australian home the water supply is one of the most important things that you always expect to be working. After all, a house would not be worth much without a working kitchen sink or toilet or shower. So familiarising yourself, and your family with your water supply system can save you stress, time, money and most of all avoid what can be costly repairs from water damage.
The most critical thing every person who lives in the house should know is where and how to turn off the main water supply.
Finding where is the first step. If your home is on the city water supply which is the greatest majority of homes then there will be a meter that controls the water supply. This is usually located at the front boundary line of your property on either the far left or far right side. In all likelihood it will be in the grass area in the meter box similar to the photo on the right.
Once you locate the meter box you will need to lift the lid to access the meter and the control valve. However do be cautious, as there are almost always spiders and often cane toads living inside.
In all likelihood when you lift the meter box lid you will be confronted by a build-up of sand or silt inside the box which frequently means digging it out to locate the control valve and the meter.
Once you have uncovered the fittings inside the meter box you will see there is only a control valve to turn off the water supply to your home and the actual water meter. Neither of these can be confused for the other.
The control valve is always located away from your house closest to the road or kerb side. Unfortunately it is not a standard valve and will come in a wide variety of configurations. Most common is a lever action ball valve which is simply a quarter turn to isolate the water.
Hopefully there are no problems with the water supply system in your home, but if the situation does arise it is best to be prepared. We therefore recommend you do the following:
- locate where your meter box is on your property and ensure you work out how to operate the control valve
- open the lid every month and remove and sand and silt build-up
- at least every 6 months check that the control valve is turning the water supply off to the whole house
- make sure every person living in the house knows where and how to turn off the main water supply control valve
If you have any questions about isolating your homes main water supply call Whywait Plumbing or next time you have a plumber from Whywait at your home or business ensure you get all your questions answered on turning off your water.
Finally always remember to turn off your water supply when going away on holiday because nothing will ruin your return home like driving up your driveway to see water pouring out of the garage or front door.
By Gary Mays
