Why Do I Need To Maintain My Hot Water System 1

OFFICE HOURS

Mon to Fri 7.30am – 4pm
24-Hour EMERGENCY SERVICE

CALL 7 DAYS FOR SERVICE!

Why Do I Need To Maintain My Hot Water System 2

YOUR TRUSTED GOLD COAST PLUMBERS & GAS FITTERS

OFFICE HOURS
Mon – Sun 7.30am – 4pm
24 Hr Emergency Service

During much of the year on the Gold Coast we frequently hear clients ask why do I need to maintain my hot water system there is nothing wrong with it and I’m still getting plenty of hot water. In summer it is easy to forget just how much we depend on our hot water systems for showering, bathing, cooking, washing dishes and washing laundry.

Why Do I Need To Maintain My Hot Water System

But by April many people suddenly appreciate just how important their hot water system is when it fails to deliver enough or frequently no hot water. Frequently the signs that there is a problem with the hot water system have been there for months and often would have been diagnosed and rectified as part of an annual service. Because hot water systems appear to be complicated many people adopt a head in the sand approach but in reality like most working fixtures in your home they will always benefit immensely from a bit of routine maintenance

In over 37 years of experience we at Whywait Plumbing are well aware that Murphy’s Law applies usually in a spectacular fashion to the failure of a hot water system with most of them failing and leaking late at night usually when it is very cold. In all honesty basic maintenance of your hot water system is fairly simple but vitally it can double the effective lifespan of your hot water system.

To maintain your hot water system the main things you need to allow for are:

  • replacing the sacrificial anode every 5 – 7 years
  • flushing out all of the minerals and sediment that over time are deposited in the bottom of the storage tank every 3 – 5 years
  • have the tempering valve maintained, tested and certified every year
  • flush the temperature and pressure relief valve (TPR valve) every 3 – 6 months
  • replace the temperature and pressure relief valve (TPR valve) every 3 – 4 years
  • replace the expansion control valve (ECV valve) every 3 – 5 years

Apart from flushing the temperature and pressure relief valve (TPR valve) all the other work is legally required to be undertaken by a licensed plumber.

Most concerning from our perspective is the failure to replace the sacrificial anode which is the biggest single cause of premature hot water service failure. Regularly replacing your sacrificial anode will extend the life of your hot water service by ten years or even more.  Whywait strongly recommend that you call us to service your  hot water system and replace the sacrificial anode every 5 years as the cost of the service is minor compared to the thousands of dollars replacement costs not mentioning the inconvenience.

The one task we recommend you personally undertake is to activate and flush the  temperature and pressure relief (TPR) valve. TPR valves continuously work automatically discharging hot water if the temperature or pressure of the water in the storage tank gets too high. Many people fail to understand if your TPR valve is not functioning properly it can potentially cause the tank to explode.

Flushing a TPR valve is relatively easy and straightforward, plus is something you can do yourself, but if the valve is already continually dripping water in all likelihood it needs replacing. To trigger the relief valve and flush it out all you need to do is lift the lever on the front of the valve all the way open and let water discharge from the drain pipe for 5 – 10 seconds then slowly put back the lever in place.

Very simply maintaining your hot water system is an investment not a cost.

By Gary Mays

 

Call Now ButtonCALL NOW